Garador C-type Cables (Genuine)

Click the PDF icon to open the printable fitting instructions for Garador C-type cables. 

SAFETY NOTES:
The spring is under tension. Please follow instructions carefully to avoid injury.

Wear protective gloves and eye protection.

 
STEP 1
Open the door approximately 6" and place a block under it to keep it open.

STEP 2
Remove the e-clip (arrow 1) and slide the roller spindle towards the centre of the door (arrow 2).

STEP 3
Thread the large loop of cable over the plastic roller (arrow 3).

STEP 4
Slide the roller spindle back to its original position (arrow 4).

STEP 5
Refit the e-clip (arrow 5).

STEP 6
Ensure the cable is located in the grooved slot of the roller spindle (arrow 6).

STEP 7
Thread the opposite end of the cable through the spring assembly as shown in Fig 2. Then locate the spring back in the plastic guide channel.

STEP 8
Holding the mid loop of the cable, slide the spring up the guide channel until you can attach the mid loop to the S hook at the top of the track.

STEP 9
Fit the cable around the pulley wheel on the top corner bracket (refer to the opposite side of the door for location of cable).

STEP 10
Prop the door in the open position and refit the spring.

Delivery Costs

Returns Policy

To return an unwanted order, please contact us within 14 days of receipt of delivery. Full returns information can be found here.