Garador/Hormann BiSecur 868Mhz HSE2 remote control handset

Part Number: WS071

Was £64.80

Special Price £44.95 (£37.46 Ex VAT)

powered by
Garador/Hormann BiSecur 868Mhz HSE2 remote control handset 4.7 61

Availability: In Stock

Unit quantity: Each
OR
Description

Details

HSE2-868-BS remote control handset, to suit all Hormann and Garador 868 Mhz electric garage door openers. The new 'BiSecur' Series 3 garage door remote control handset is suitable for current Garador and Hormann garage door openers, such as Ecomatic, Promatic, Supramatic and GaraMatic systems. It is also fully backwards compatible with older 868 Mhz Garador and Hormann blue button handsets.

Stylish glossy black finish handset with zinc end caps. The handset can be easily pried apart to replace the battery.

Note: It is not a suitable replacement for older 40 Mhz handsets, with grey buttons.

CR2032 3V battery, keyring holder and programming instructions are included.

Garador part no: 6712


Product Reviews

eKomi Product Feedback

See the last seven reviews of our customers.

03.10.2019 | 16:27

Operates automatic garage door perfectly and easy to set up following the instructions originally issued with the garage door. Good quality but not quite as good as the original remote handset
22.04.2019 | 16:26

Thoroughly professional company to deal with, helpful, timely and great support. Quality of the remote is very good, programming was straight forward\nThanks to everyone on the team at WS
01.04.2019 | 16:26

Can not fault this company for service and delivery. They were also very helpfully in trying to pair this fob with the door opener,only problem being the written instructions and verbal help was not successful. I even got a professional door installer and he could not pair it. It was the correct fob for this motor as I checked it with WS before ordering. I have now returned this item as requested by WS and hope I get speedy refund.
23.03.2019 | 06:21

Excellent
15.03.2019 | 15:03

Good quality product.
11.02.2019 | 16:55

So far all ok. They were easy to programme. Would recomend. Thank you.
28.11.2018 | 07:45

Robust design and easy to set up with enclosed instructions.
Fitting Instructions

Programming procedure (Series 3 to Series 3)

Note: to program a BiSecure handset from a BiSecur handset you should NOT set the handset into ‘fixed code’. BiSecur uses ‘rolling code’ technology. In ‘rolling code’ the LED light on the handset should be BLUE when pressed.

1. Press and hold the button on the ‘teaching handset’ – ie your existing handset – and keep the button pressed down. The LED should briefly illuminated BLUE, before it goes out and returns to flash BLUE/RED alternatively.
2. Place the ‘learning handset’ – ie your new handset – to the side of the teaching handset and press the desired button which you would like to learn the code. Keep the button pressed down.
- The LED will flash slowly in BLUE
- Once the code has been recognised, the LED flashes more quickly in BLUE
- After a couple of seconds the LED goes out

The handset has now been successfully coded. Please test out the functionality. To code additional functions, repeat above procedure.

Reset procedure

To reset the remote control handset (and wipe the existing codes from memory) please follow the below procedure. Note: Performing a reset to revert the handset to ‘rolling code’.

1. Open the handset casing and remove the battery
2. Press a circuit board button and keep pressed down
3. Insert the battery back into the handset
4. The LED flashes slowly in BLUE for 4 seconds
5. The LED flashes quickly in BLUE for 2 seconds
6. The LED remains illuminated in BLUE
7. You can now release the circuit board button once the BLUE light goes out
8. All radio codes are now newly assigned

NOTE: Releasing the circuit board button early will not result in the handset reset being completed.

 

Using the BiSecur handset with a Series 2 operator (handset with blue buttons) – ‘setting the fixed code’

The BiSecur remote control handset (Series 3) is backwards compatible with the older Series 2 (blue button) handsets. First the BiSecur handset must be set into ‘fixed code’.

1. Open the hand transmitter casing and remove the battery.
2. Press and hold a button on the circuit board.
3. Return the battery into its position in the handset (which keeping the button pressed down)
- The LED slowly flashes in BLUE for 4 seconds
- The LED flashes more quickly in BLUE for 2 seconds
- The LED will be illuminated in BLUE
4. Keep the circuit board button press.
- The LED will flash slowly in RED for 4 seconds
- The LED will flash more quickly in RED for 2 seconds
- The LED will be illuminated in RED

The ‘fixed code’ 868 Mhz is now activated, and you can close the casing on the handset. The LED on the handset when a button is pressed in ‘fixed code’ should be RED.

Programming procedure (Series 3 to Series 2)

1. Press the button on the ‘teaching handset’ – ie you existing remote control with blue buttons – whose code is to be inherited, and keep the button pressed. The LED will light up RED.
2. Hold the ‘learning handset’ – ie your new Series 3 BiSecur handset – next to the teaching handset.
3. Press the transmitter button which you would like to learn the code, and keep the button pressed.
- The LED will flash slowly in RED
- Once the code is recognised, the LED will flash more quickly in RED
- After a couple of seconds, the LED will go out

You have now successfully coded your new handset. Please test it is functioning correctly. The learn additional codes, repeat the above procedure.


Product Reviews

eKomi Product Feedback

See the last seven reviews of our customers.

03.10.2019 | 16:27

Operates automatic garage door perfectly and easy to set up following the instructions originally issued with the garage door. Good quality but not quite as good as the original remote handset
22.04.2019 | 16:26

Thoroughly professional company to deal with, helpful, timely and great support. Quality of the remote is very good, programming was straight forward\nThanks to everyone on the team at WS
01.04.2019 | 16:26

Can not fault this company for service and delivery. They were also very helpfully in trying to pair this fob with the door opener,only problem being the written instructions and verbal help was not successful. I even got a professional door installer and he could not pair it. It was the correct fob for this motor as I checked it with WS before ordering. I have now returned this item as requested by WS and hope I get speedy refund.
23.03.2019 | 06:21

Excellent
15.03.2019 | 15:03

Good quality product.
11.02.2019 | 16:55

So far all ok. They were easy to programme. Would recomend. Thank you.
28.11.2018 | 07:45

Robust design and easy to set up with enclosed instructions.
Specification

Additional Information

Part Number WS071
Product Weight 0.2500 kg
Radio Frequency 868
Unit quantity Each
Manufacture Guarantee 1 year

Product Reviews

eKomi Product Feedback

See the last seven reviews of our customers.

03.10.2019 | 16:27

Operates automatic garage door perfectly and easy to set up following the instructions originally issued with the garage door. Good quality but not quite as good as the original remote handset
22.04.2019 | 16:26

Thoroughly professional company to deal with, helpful, timely and great support. Quality of the remote is very good, programming was straight forward\nThanks to everyone on the team at WS
01.04.2019 | 16:26

Can not fault this company for service and delivery. They were also very helpfully in trying to pair this fob with the door opener,only problem being the written instructions and verbal help was not successful. I even got a professional door installer and he could not pair it. It was the correct fob for this motor as I checked it with WS before ordering. I have now returned this item as requested by WS and hope I get speedy refund.
23.03.2019 | 06:21

Excellent
15.03.2019 | 15:03

Good quality product.
11.02.2019 | 16:55

So far all ok. They were easy to programme. Would recomend. Thank you.
28.11.2018 | 07:45

Robust design and easy to set up with enclosed instructions.
Delivery & Returns
Dispatched same day if ordered before 3.00pm

Delivery Information

Available delivery options will be shown when you checkout.

Most stock items will be dispatched the same day if ordered before 2pm. Some larger items or non-stock items may have a longer lead time associated - please see above for any product specific lead time.

  • Standard Delivery - Usually delivered in 1-2 working days
  • Express Delivery - Delivered next working day (orders before 2pm

Fulll delivery information and costs can be found here.

Returns

Full details on returning any unwanted items can be found here.

  • Post the items back to us at our address
  • Arrange for us to collect the items (cost associated)

Product Reviews

eKomi Product Feedback

See the last seven reviews of our customers.

03.10.2019 | 16:27

Operates automatic garage door perfectly and easy to set up following the instructions originally issued with the garage door. Good quality but not quite as good as the original remote handset
22.04.2019 | 16:26

Thoroughly professional company to deal with, helpful, timely and great support. Quality of the remote is very good, programming was straight forward\nThanks to everyone on the team at WS
01.04.2019 | 16:26

Can not fault this company for service and delivery. They were also very helpfully in trying to pair this fob with the door opener,only problem being the written instructions and verbal help was not successful. I even got a professional door installer and he could not pair it. It was the correct fob for this motor as I checked it with WS before ordering. I have now returned this item as requested by WS and hope I get speedy refund.
23.03.2019 | 06:21

Excellent
15.03.2019 | 15:03

Good quality product.
11.02.2019 | 16:55

So far all ok. They were easy to programme. Would recomend. Thank you.
28.11.2018 | 07:45

Robust design and easy to set up with enclosed instructions.