Cardale Mk3 Drum Cables

Click the PDF icon to open the printable fitting instructions for Cardale Mk3 Cables. 

SAFETY NOTICE
All work must be undertaken by a responsible adult.
All work is undertaken at your own risk.
Always wear safety goggles and gloves when working with springs under tension.

1. First make sure that there is one cable still attached and that there is still tension on the spring.
2. You then pull on the existing cable until the holes which are in the centre drum, line up with the holes in the outer casing. Put a 6" nail straight through the holes, this will lock the tension to enable you to fit a new cable.
3. Take the cable, loop first, thread it over the corner small pulley, down the back of the link arm, inside the track, undo the bottom screw of the track, place loop end of the cable over the nylon wheel and onto the spindle. Replace the screw in the track.
4. Take the other end of the cable and place it around the centre pulley and into the slot, make sure the cable is over the corner pulley, pull on the cables and let the 6" nail or pin drop out.

Delivery Costs

We dispatch orders from Monday-Friday. We will not dispatch orders on weekends or bank holidays - orders placed during this time will dispatch on the following working day.

We aim to dispatch all orders on the same day, provided the order is placed before 2pm. Orders placed after this time will usually ship the following working day.

Returns Policy

To return an unwanted order, please contact us within 14 days of receipt of delivery. Full returns information can be found here.