Garador DR/RM Garage Door Spring

Garador retractable DR / RM springs to suit double garage doors with horizontal tracks running into the garage, and supported by track support straps hanging from the ceiling. When the garage door is opened the door retracts almost fully inside the garage.

The door will have two springs located on either side of the door usually each encased inside a high-impact plastic cover tube.

The link arms on DR / RM doors measure 3' 9 3/4" in length and have three fixing point holes in the top of the arm.

Please see the spring table to determine the spring number required. Alternatively, the spring number was often engraved on one end of the spring.

Important: These springs are not compatible with older Garador Double Type R model doors with approx. 660mm (26") long springs. The springs for this door were discontinued some years ago and are obsolete. There are no compatible replacement springs for this model of door, to replace a broken spring, please see our garage door mechanisms. The arms on the older door are 4ft ½" (123cm) in length and only have a single hole at the top of the arm for the spring pin.

It is always recommended to replace springs in pairs, so that the door remains balanced.
Please note: If replacing only one spring, our standard product warranty does not apply. Please see terms and conditions for more information.