Sommer Telecody+ Wireless Keypad

Reset code sticker: Please ensure the sticker is kept safe, as this will be required to delete all programmed access codes (e.g. if you forget the access code). 

Setting the Telecody on:

Telecody is disabled on arrival and must be enabled before use:

• Press and hold button M.
• LED 2 will flash 3 times. 
• LED 1+2 will light for two seconds. 
• Backlighting is switched on.

Programming access code:

Note: An access code consists of 2 parts with a total of 8 characters:

Part 1: desired radio command which must be input every time the access code is input;

Part 2: desired access code (freely selectable).

1. Press button P
2. Press button 1
3. Press button P again. Radio command 1 is selected. 
4. input part 1 of the access code:
   • Press button 1
   • Input of part 1 complete
5. Input part 2 of the access code:
   • Press button 8
   • Press button 3
   • Press button 5
   • Press button P
   • Input of part 2 complete
   • LED 1+2 light up for 2 seconds. 
   • The access code for radio command 1 is now 1835. 
6. Input 1835 to check the access code:
   • LED2 lights briefly.
   • LED1 lights green to acknowledge that the command was received by the radio receiver. 

Due to COVID-19 deliveries may take slightly longer than usual so please allow up to 7-10 working days for your product to arrive.

Delivery Costs

Returns Policy

To return an unwanted order, please contact us within 14 days of receipt of delivery. Full returns information can be found here.